FY-3D MERSI-II云顶产品算法及精度检验

张淼; 徐娜; 郑照军; 陈林

doi:10.16032/j.issn.1004-4965.2022.071

FY-3D MERSI-II云顶产品算法及精度检验

doi: 10.16032/j.issn.1004-4965.2022.071

中国气象局中国遥感卫星辐射测量和定标重点开放实验室/国家卫星气象中心，北京 100081

基金项目:

风云卫星应用先行计划 FY-APP-2021.0505

详细信息

通讯作者:
张淼，女，河北省人，副研究员，从事卫星遥感反演和应用研究。E-mail：zhangmiao@cma.gov.cn

中图分类号: P405
计量
- 文章访问数: 296
- HTML全文浏览量: 90
- PDF下载量: 40
- 被引次数: 0
出版历程
- 收稿日期: 2021-06-21
- 修回日期: 2022-10-18
- 网络出版日期: 2023-03-06
- 刊出日期: 2022-12-20

RETRIEVAL AND VALIDATION OF FY-3D MERSI-II CLOUD TOP PRODUCTS

Key Lab of Radiometric Calibration and Validation for Environmental Satellites, China Meteorological Administration (LR‐CVES/CMA)/National Satellite Meteorological Center, China Meteorological Administration (LRCVES/CMA), Beijing 100081, China

摘要

摘要: 云顶温度和云顶高度作为基本的云参数，在云的热辐射强迫估计，航空气象保障，数值天气预报，天气气候研究等方面具有十分重要的意义。FY-3D/MERSI-II云顶温度产品基于云在红外波段的发射率假设，利用两个红外分裂窗通道(11.0 μm、12.0 μm)结合一维变分方法寻找最优云顶温度层，再利用数值天气预报廓线产品插值反演对应的云顶高度和压强。利用AQUA/MODIS所提供的云产品数据对FY-3D/MERSI-II云顶温度、云顶高度、云顶压强产品进行精度检验，结果表明：FY-3D/MERSI-II水云云顶温度精度为-1.2±4.6 K，云顶高度精度为1.4±1.8 km，云顶压强精度为-140.9±114.5 hPa；厚冰云云顶温度精度为7.0±6.0 K，云顶高度精度为-1.0±0.9 km，云顶压强精度为37.1±36.0 hPa；混合云云顶温度精度为1.5±8.5 K，云顶高度精度为0.8±2.2 km，云顶压强精度为-87.4±157.8 hPa，单层卷云和多层云的反演偏差较大。辐射传输模式在云顶性质反演中有十分关键的作用，但目前对冰云特别是卷云的性质认识不足，因此如何精确描述冰晶辐射特性，提高冰云特别是卷云辐射传输的模拟精度将是下一步的工作重点。
- FY-3 /
- 云顶温度 /
- 云顶高度 /
- 云顶压强 /
- 精度检验
Abstract: As basic cloud parameters, cloud top temperature and cloud top height are of great significance to the estimation of cloud thermal radiative forcing, aviation meteorological support, numerical weather prediction and climate research. In the present research, we employ the FY-3D / MERSI-II cloud-top temperature products based on the assumption of cloud emissivity in the infrared band and two channels (11 μm and 12 μm) to find the optimal cloud-top temperature layer using the 1DVar method, and then interpolate the corresponding cloud-top height and pressure by using the numerical weather prediction profile product. Then we adopt the AQUA/MODIS cloud products to evaluate the retrieved products, and the results show that: for water cloud, the precision of cloud top temperature is -1.2±4.6 K, the precision of cloud top height is 1.4±1.8 km, and the precision of cloud top pressure is -140.9±114.5 hPa; for thick ice, the precision of cloud top temperature is 7.0±6.0 K, the precision of cloud top height is -1.0±0.9 km, and the precision of cloud top pressure is 37.1 ± 36.0 hPa; for mixed cloud, the precision of cloud top temperature is 1.5 ± 8.5 K, the precision of cloud top height is 0.8 ± 2.2 km, the precision of cloud top pressure is -87.4±157.8 hPa, and the precision of the products for cirrus and multi-layer cloud is poor. The radiative transfer model plays a key role in the retrieval of cloud top properties; however, there is insufficient understanding of the nature of ice cloud especially cirrus cloud. Therefore, accurate description of the radiation characteristics of ice crystals and improvement in the simulation accuracy of radiation transfer of ice cloud, especially cirrus cloud, will be the focus of the following research.
- FY-3 /
- cloud top temperature /
- cloud top height /
- cloud top pressure /
- quality validation

HTML全文

图 1 FY3D MERSI-II云顶温度、云顶高度、云顶压强产品(2020年7月12日12:25)与MODIS相应产品(2020年7月12日12:30)对比图

各小图依次是FY-3D MERSI-II云顶温度(a)，MODIS云顶温度(b)，FY-3D MERSI-II云顶高度(c)，MODIS云顶高度(d)，FY-3D MERSI-II云顶压强(e)，MODIS云顶压强(f)，FY-3D MERSI-II云顶温度与MODIS云顶温度对比散点图(g)，FY-3D MERSI-II云顶高度与MODIS云顶高度对比散点图(h)，FY-3D MERSI-II云顶压强与MODIS云顶压强对比散点图(i)。

下载: 全尺寸图片幻灯片

图 2 云顶温度偏差（a）和均方根误差（b）统计结果

下载: 全尺寸图片幻灯片

图 3 云顶高度偏差（a）和均方根误差（b）统计结果

下载: 全尺寸图片幻灯片

图 4 云顶压强偏差（a）和均方根误差（b）统计结果

下载: 全尺寸图片幻灯片

表 2 T_c、e_c、β的先验估计值及误差协方差矩

云类型	T_c	σ(T_c)	τ_{11 μm}	σ(e_c)	β	σ(β)
水云	T11	10	2.3	0.2	1.3	0.2
过冷水云	T11	10	2.3	0.2	1.3	0.2
混合云	T11	10	2.3	0.2	1.3	0.2
厚冰云	T11	10	2.3	0.2	1.1	0.2
单层卷云	Ttrop+15	20	0.9	0.4	1.1	0.2
多层云	Ttrop+15	20	2.0	0.4	1.1	0.2

下载: 导出CSV

参考文献(17)

[1]	HOLZ R E, ACKERMAN S A, NAGLE F W, et al. Global Moderate resolution Imaging Spectroradiometer (MODIS) cloud detection and height evaluation using CALIOP[J]. J Geophys Res, 2008, 113, D00A19, doi: 10.1029/2008jd009837.
[2]	WEISZ E, LI J, MENZEL W P, et al. Comparison of AIRS, MODIS, CloudSat and CALIPSO cloud top height retrievals[J]. Geophys Res Lett, 2007, 34: L17811, doi: 10.1029/2007GL030676.
[3]	李光伟. 基于CPR和MODIS探测结果的云顶温度和云顶高度反演研究[D]. 合肥: 中国科学技术大学, 2010.
[4]	MIN M, LI J, WANG F, et al. Retrieval of cloud top properties from advanced geostationary satellite imager measurements based on machine learning algorithms[J]. Remote Sensing of Environment, 2020, 239: 111616.
[5]	樊宏杰, 黄亦鹏, 李万彪. 基于卫星红外遥感的云顶高度反演算法综述[J]. 北京大学学报(自然科学版), 2017, 53(4): 783-792
[6]	WINKER D M, VAUGHAN M A, OMAR A, et al. Overview of the CALIPSO mission and CALIOP data processing algorithms[J]. J Atmos Oceanic Technol, 2009, 26(11): 2 310-2 323.
[7]	ZHANG P, CHEN L, XIAN D, et al. Recent progress of Fengyun meteorology satellites[J]. Chinese Journal of Space Science, 2018, 38(5): 788-796.
[8]	杨军, 咸迪, 唐世浩. 风云系列气象卫星最新进展及应用[J]. 卫星应用, 2018(11): 8-14.
[9]	SEEMANN S W, BORBAS E E, KNUTESON R O, et al. Development of a global infrared land surface emissivity database for application to clear sky sounding retrievals from multispectral satellite radiance measurements[J]. J Appl Meteorol Climatol, 2008, 47(1): 108-123, doi: 10.1175/2007JAMC1590.1.
[10]	REYNOLDS R W, SMITH T M, LIU C, et al. Daily high-resolution-blended analyses for SST[J]. J Climate, 2007, 20(22): 5 473-5 496. DOI: 10.1175/2007JCLI1824.1
[11]	MENZEL W P, FREY R A, BAUM B A, et al. Cloud top properties and cloud phase-algorithm theoretical basis document[R]. NASA Goddard Space Flight Center, Tech. Rep. ATBD Reference Number: ATBD-MOD-05. 2006.
[12]	BAUM B, MENZEL W P, FREY R, et al. MODIS cloud top property refinements for Collection 6[J]. J Appl Meteorol Climatol, 2012, 51(6): 1 145-1 163.
[13]	HEIDINGER A K, PAVOLONIS M J. Gazing at cirrus clouds for 25 years through a split window, part 1: Methodology[J]. J Appl Meteor Climatol, 2009, 48(6): 1 100-1 116.
[14]	HEIDINGER A. ABI cloud height. In: NOAA/NESDIS/STAR (Ed. ), GOES-R Algorithm Theoretical Basis Document (ATBD)[R]. 2011: 1-77.
[15]	LI J, WOLF W, MENZEL W P, et al. International ATOVS processing package: Algorithm design and its preliminary performance. Optical Remote Sensing of the Atmosphere and Clouds[M]. Wang J et al, Eds., (SPIE Proceedings, Vol. 3501), 1998: 196-206.
[16]	HUANG Y, SIEMS S, MANTON M, et al. Evaluating Himawari-8 Cloud Products Using Shipborne and CALIPSO Observations: Cloud-top Height and Cloud-top Temperature[J]. J Atmos Oceanic Technol, 2019, 36(12): 2 327-2 347.
[17]	HEIDINGER A K, PAVOLONIS M J, HOLZ R E, et al. Using CALIPSO to explore the sensitivity to cirrus height in the infrared observations from NPOESS/VⅡRS and GOESR/ABI[J]. J Geophys Res, 2010, doi: 10. 1029/2009JD012152 ER.